RG131 Radial Inserter with Guide Pin
A high-density radial lead component insertion machine, the RG131 with guide pin system provides stable, high-density insertion at 14,400 cph (0.25s/component).
This through-hole machine inserts components with a pitch range of 2.5mm, 5.0mm or 7.5mm and allows for 40 or 80 component inputs - a wide component range in a compact footprint with a low cost of ownership.
Full auto-recovery corrects insertion errors while the part exhaust detection system allows for proactive part replenishment and promotes continuous productivity.
- 4 insertion directions (0°, 90°, -90°, 180°)
- Wide pitch range encompassing 2.5/5.0/7.5 and 10 mm pitch in a common platform - eliminating the need for post insertion manual placements of 10 mm pitch components
- Auto-recovery and part exhaust detection
- Enhanced programmable T-Clinch technology ensures interference-free insertions by eliminating shorts on underside layout
- Wide component range up to 18 mm diameter (ø)
Featured Specs
SKU | NM-EJR3A/NM-EJR4A |
---|---|
Model ID | RG131 |
Model No. | NM-EJR3A |
PCB Dimensions (mm) | L 50 mm x W 50 mm to L 508 mm x W 381 mm |
Maximum Speed | 0.25 s/component to 0.6 s/component [*1] |
No. of Component Inputs | 40 |
Applicable Components | Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network |
PCB Exchange Time | ~2s to about 4s (Room temperature 20℃) |
Insertion Direction | 4 directions (0°, 90°, -90°, 180°) |
Electric Source | 3-phase AC 200 V, 3.5 kVA [*2] |
Pneumatic Source | 0.5 MPa, 80 L/min (A.N.R.) |
Dimensions (mm) | W 3,200 x D 2,417 x H 1,620 [*3] |
Mass | 2,250 kg |
Model No. | NM-EJR4A |
PCB Dimensions (mm) | L 50 x W 50 to L 508 x W 381 |
Maximum Speed * | 0.25 s/component to 0.6 s/component [*1] |
No. of Component Inputs | 80 (Connection mode), 40 + 40 (Exchange mode) |
Applicable Components | Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network |
PCB Exchange Time | ~2s to about 4s (Room temperature 20℃) |
Insertion Direction | 4 directions (0°, 90°, -90°,180°) |
Electric Source * | 3-phase AC 200 V, 3.5 kVA [*2] |
Pneumatic Source | 0.5 MPa, 80 L/min (A.N.R.) |
Dimensions (mm) * | W 3,200 x D 2,417 x H 1,620 [*3] |
Mass | 2,350 kg |